The Latest 32 Bit ESC is here with 2-6s Input!
Uses 40V MOSFET, compared with 30V brands - Gives more redundancy
Uses 10 capacitors, much more than competing brands
telemetry port and current protection supported
Based on our ES30HV, the most reliable ESC in the market
Firmware: BLHeli 32 bit
Input: 2-6 Cell LiPo
Cont./Burest Current: 35A/45A≥10S
Weight:8.3 g(including cables)
High voltage MOSFET(40V)
Telemetry port and current protection supported
i am using these with a hypetrain FC and everything has been seamless. no hassles, all works! you dont need to worry about bridging anything to reverse your motors. simply just solder them up normally and you can do the reverse motors in the software. remember: these are 32bit so you will need to use BLHeliSuite32 and not BLHeli - Configurator to configure these. havent had any problems.