AnyFC F7 Flight Controller
Who needs an F7 Flight controller ! - you do if you want to take advantage of all the features available right now.
It's not the fact that it runs at 216 Mhz - running 8k at 5% cpu load still runs ok on F3 & F4
The extra Uarts is why you want to upgrade!
Having 8 uarts will let you run all the cool features like, controlling the tramp Vtx with your taranis, using the camera control features to change your camera settings,
running a gps, whatever new feature you can think of you can probably throw at it.
These are still very new Flight controllers and I'm sure you will see more development coming soon to take advantage of what the F7 processor can offer.
These boards are made with the US stock of the Processor, so it's a little more expensive than the Chinese ones
Actual photos will be updated soon.
RC Groups Thread
Please consider supporting the designer with a donation to continue this project - part proceeds from these FC will be sent to the designer.
STM32F745VGT6 100lqfp 216MHz
All 8 uarts available + VCP
10 pwm outputs + 6 inputs
external SPI (shared with U4/5)
support for CAN
SD card logging (SPI)
3 AD channels, one with 10k/1k divider, two with 1k series resistor
with a 36x36mm Layout and 30.5x30.5mm Hole Setup
1 X F7 flight controller
1 X Cable set