Shuriken X1 Racing Quad - Frsky (BNF) - V2

Bind and Fly

Only 1 Left!

Very impressed with this kit - well thought out and with great gear on it.

Not recommended for the beginner as this Quad is quick.
This kit is the v2 that has adopted the feedback from pilots of the V1 so rest assured you're getting the best available build.

Shuriken X1 is a high-performance FPV racing drone of the latest design from Holybro. Shuriken X1 has FC; OSD; PDB and VTX all highly integrated, which enables us to get all those modules assembled expediently without additional soldering. The height of this racing drone is very much lower than those conventional X frames, even when it has the Gopro Session mounted on it. Shuriken X1 consists of those components with the best performance and reputation Just take it out of the box and enjoy the very fierce but yet stable flying!


Full 3K Carbon Fiber
Nickel-plated 12.9 screws
Easy grip black anodized spacers
FC;OSD;PDB;VTX and voltage/current sensor All In 1 Board
5.8GHz, Vtx with built-in push button switching and channel display
High-quality antenna
Integrated MWOSD (firmware V1.5 preloaded)
1/3 SONY Super HAD II CCD, PAL, 600TVL Camera, 2.5mm Lens
S.bus, FrSky, or PPM Receivers Compatible 
RGB LED board
Two mounting positions for the FPV Camera: one for a 0°~40° view angle, a second mounting position for 35°~70° view angle
Included TPU GoPro Session mount. HD Camera angle 35°
BetaFlight Pre-loaded


 32-bit F3 Flight Controller, MPU6050 Gyro/Accelerometer
ATmega328P with Arduino Bootloader(minim OSD)
MAX7456 Monochrome On-Screen Display(minim OSD)
FTDI Cable Compatible Pinout(minim OSD)
OneShot125 BLheli F39X 30A / 40A burst BLHeli ESCs
2305-2600kv Motors (T-MOTOR F40 II)
Compact size for 5" propellers, 200mm motor to motor.
Input voltage 7v to 42v.
PCB Maximum Continuous Current 120A
Filtered voltage output - output 5.2v 2A
Weight, ~343g without battery


1 x Shuriken X1 
1 x Flight Contoller
1 x PDB
1 x Receiver
4 x ESC
4 x 2305 Motor
12 x 5 Inch Propeller
1 x VTX
1 x 600TVL Cam
1 x 5.8G 4 skew planar antenna 
1 x  Gopro session protector (TPU 3D Print)
2 x Battery strap



SKU 5182
Brand HolyBro
Shipping Weight 0.8500kg
Shipping Width 0.310m
Shipping Height 0.100m
Shipping Length 0.310m
Shipping Cubic 0.009610m3

Be The First To Review This Product!

Help other Buzz Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category