Raceflight Race Pack - Revolt FC & 4 Racebee 30A Esc

WAS $135.00
NOW $115.00
Sale Ends in
00:00 am, 31 December 2017
In Stock

Combine and save

1 x Raceflight Revolt Fc & 4 Racebee 30a Esc's

Revolt

The RaceFlight Revolt flight controller is the most advanced, performance-driven, flight controller ever designed. Capable of running 32kHz gyro sample, PID loop, and motor loop, processing all calculations in real time. The Revolt is truly at the top of its class. The Revolt uses an F405 MPU and an Invensense 20602 gyro in combination with RaceFlight software to give you the BEST performance possible. This gyro is by far the most noise free and accurate gyro available.

Performance

The Revolt presents not only the BEST performance but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! For most people tuning is not even required.  Our boards come preloaded with software and defaults that should fly amazingly for 99% of people.

In addition to the vibration rejection technology, the SSG gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invense 20602 gyro has never been used in any flight controller before and definitely, gives you the leading advantage over others.

Software

Our flight controller comes pre-loaded with the latest RaceFlight Community release. Just go to the google store and download the latest configurator and you should be ready to connect. Drivers should no longer be needed.
RaceFlight One is also available in alpha format. Just join our slack at http://raceflight.net/invite/ and ask to be added to the RaceFlight One channel. This is truly amazing software, which flies so well you can completely eliminate prop wash. Setup is a breeze as well, just run a couple wizards and you will get right up into the air.

Setup Simplicity

Setting up the Revolt is easy.  The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and remember the order 1, 2, 3, 4.  Select your voltage on the bottom, as well as inverted or not. The Revolt also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

Integrated vibration dampening dummies
Dual inverters for Taranis and Futaba radios
True hardware radio diversity
Selectable voltage for your UARTs
LED Driver for WS2812b programmable LED
Infrared LED Race Transponder support – just solder an infrared LED to the Revolt and set it up in the RF1 configurator – *** features coming soon within code
Future iPhone and Android configurator support – *** features coming soon within code
High-Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
Through-hole solder pads – forms an I-Beam when soldered for extra strength
FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
Integrated buzzer driver
Voltage and current ADC pins, for full voltage and current monitoring
Full telemetry output support *** features coming soon within code
ESC flashing and configuration built into configurator
Most active software development
Selectable 3.3v or 5v voltage
4 serial uarts
Bluetooth expandable *** features coming soon within code
F4 processor
16mb of flash memory
GPS expandable *** features coming soon within code
Dimensions: 36mm x 36mm
Mounting holes: 30.5mm squared to center of holes


The RaceFlight Guarantee

In addition to all the other amazing things the Revolt presents, Revolters get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your Revolt. We have by far the best support system and community in the industry.  Join our slack and talk to other users, or contact support directly.

Wiring Diagrams

https://revoltfc.com/pinout-diagram.html

 

Racebee 30A ESC

The RaceFlight “RaceBee” electronic speed controllers are D Shot ready! Running the latest BlHeli_S firmware, these ESCS are capable of D shot and Multishot, giving you the fast response times you need on the track or in the air.
Version 2 ESC's

These come bare. Wiring kit purchased separately.

30 amp continuous, 40 amp burst.

Dshot ready.

Supports Mulitshot and Oneshot.

2.8g weight.

15mm x 30mm

(6004)

SKU 6004
Brand RaceFlight
Shipping Weight 0.1000kg

Be The First To Review This Product!

Help other Buzz Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review


You May Also Like



Others Also Bought



More From This Category