Impulse RC Helix Parts - HELIX FLIGHT CONTROLLER / PDB

$55.00
Only 1 Left!

Helix Spares

All the Parts to Keep your Helix Running

 

HELIX ZX5 AND ZX6 FLIGHT CONTROLLER - RACING FPV FRAME

 

ImpulseRC designed flight controller and integrated power distribution board.

The Helix flight controller is precise, the flight controller is completely soft mounted and its enlarged holes allow the standoffs to pass through to the carbon plate below leaving the Helix flight controller floating on a self-adhesive die cut foam rubber gasket (Included). Isolating the flight electronics from vibrations gives the most crisp and responsive flight characteristics possible.

Our Helix flight controller features an MPU6000 SPI gyro which is well known for its Low noise and great ability in handling tough environments.

Not only is this Flight Controller compact but it packs a punch! It is capable of running on a 6S Lipo (25.2v) with no modifications! The flight controller electronics are rated for up to 40 volts which means even when using a 6s Lipo (25.2v) you will not have to use a capacitor to reduce voltage spikes because the electronics are already capable of taking any voltage spikes a 6s Lipo is capable of producing. (Please note we do not recommend using anything higher then 6s (25.2v) because of voltage spikes that are capable of happening when using higher powered ESC on setups that use 6s (25.2v).

HELIX ZX5 AND ZX6 VIDEO TRANSMITTER BOARD - RACING FPV FRAME

 

SPARE ARM FOR THE HELIX ZX5 RACING FPV FRAME

Weight = 8.96g

 

HELIX ZX5 AND ZX6 RACING FPV FRAME - FASTENER SPARES PACK

*TWO OF EVERY FASTENER USED IN THE HELIX ZX5 AND ZX6 RACING FPV FRAME *

 

HELIX ZX5 AND ZX6 VIBRATION PAD FOR HELIX FLIGHT CONTROLLER - RACING FPV FRAME

3MM LIPO PAD FOR THE HELIX ZX5 AND ZX6 RACING FPV FRAME

 

The material is between neoprene and rubber in density. (As used industrially in the mining industry)

Adhesive backed with Venture Tape.

More grip, strength and resistance to crushing than neoprene, and less weight than rubber.

 

HELIX ZX5 ESC FAIRING SET - 4 PACK

Internal dimensions for ESC: 30mm x 15mm x 4.5mm. 
Fairing weight: 3.3g

 

CARBON BLANK PLATE TO REPLACE THE HELIX VTX BOARD WITH BUILD IN OSD 
Includes 4x M3 Press Nuts.
2mm Thick Carbon.

 

SPARE STRETCHED X MAIN PLATE FOR THE HELIX RACING FPV FRAME

Please note when using the Helix "Stretched X" main plate you will also need a  Helix "Stretched X" top plate. You will also need to use Helix ZX6 arms to allow the use of 5" props. 
Please do not forget a Helix vibration pad and  Helix lipo pad when replacing your Helix top or main plate. 

(5699)

SKU 5699
Brand Impulse RC

Be The First To Review This Product!

Help other Buzz Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category