FrSky M9 Hall Sensor Gimbal For Taranis X9D & X9D PlusRated 5/5 based on 2 reviews.
Upgrade your Taranis X9D with this plug-n-play high resolution M9 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers.
Can be enable or disable self centering on both axis and ratcheting on the Y axis
Special material quality that wears well
Supply Voltage (VCC): DC 3.0 ~ ±0.5V
Sensitivity: 2.50 mV/G
Linear Output Voltage Range:
0.1 ~ （ VCC +0.1） V
Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC
Noise (no load): ≤40mVpp
(Limit of 2 Gimbals per order until all stock arrives)
Welcome upgrade6 April 2017Definitely a lot smoother -- a welcome and affordable upgrade to the original gimbals.
High Quality Replacement Gimbals20 March 2017These gimbals are very easy to install in the Taranis X9D and feel very smooth and precise while using them. Adjustable tension also allows you to make them looser or tighter depending on personal preferences. You will need to calibrate these once installed and make sure they are done correctly. I noticed mine would suddenly lock roll all the way to the left if I moved the sticks too fast. This might result in damage to your quad/plane/etc. if not calibrated correctly.