The new range of Diatone FPV frames bring you a quality frame at an affordable price.
They are constructed of G10 so they are strong and light weight. #17 has a clean and dirty frame setup to provide vibration free video.
The cage area provides mounting for a board camera which can be removed if you prefer to mount a mobius camera within the cage for better protection.
You can also mount a mobius camera on top of the frame and there are slots to tie it down with a velcro strap.
Plenty of room to mount your fpv gear and many mounting options have been catered for.
The frame accepts flight controllers of various sizes with it's diagonal mounting design 30mm flight controller such as the flip 1.5 or flip 32+ are a great match but you can also mount a naze32 or openpilot cc3d.
Clean and dirty separation is acheied through the use of cheap yet effective Anti vibration balls that you can swap out with different strength ones to achieve the desired effect.
there is also the mounting holes if you feel you would prefer the more conventional rubber / silicone anti vibration standoffs like these M3 Vibration isolation
Frame Weight: 190g
Frame Width: 230mm motor to motor
Frame Height: 90mm
Flight controller: Flip 1.5, Flip32+
Motors: Cobra 2204 2300kv, Swarm 2300, RCtimer 1806 2300
Esc's: Rapid v2.2 12a, Rctimer SK12a
Props: Hqprop 5x3 or Hqprop 5x4
Battery: Horeson 3s 1200mAh, Stinger 3s 1300.
These frames are very adaptable I made a few quick mods myself to make it even better
the pic below I replaced the Bobbins with Silicone m3 standoffs and also used some of the flip 260 landing gear which is just a cut down aluminium standoff with a pvc end cap
We are also producing longer Arms in house that will be available very soon (3mm thick) - keep an eye out for them.
Be The First To Review This Product!
Help other Buzz Hobbies users shop smarter by writing reviews for products you have purchased.